Tuesday, 19 March 2013

Going into storage

We are packing up our real house ready to put it on the market, so all of the dollshouses are going into self-storage at Easter including the Willowcrest.  It's all packed up and ready.

Here is an excerpt from my main blog explaining how I packed my dollshouses:

"I'm packing the dollshouse stuff the same way I did last time we moved.  I tend to stick things into my houses anyway, either permanently, or temporarily using tacky wax, so there aren't many loose things.  Life is too short to take everything out and wrap it individually.  So what I do is wad up tissue paper and carefully place it into each room, filling the nooks and crannies until the entire room is held lightly in place with tissue paper.  If there is something heavier that lacks support, for example a doll, then I will wrap it individually and place it back into the room. For big rooms, once I've covered everything with tissue paper, I might fill in interior voids with crumpled newspaper or bubble wrap.  Once all the voids are filled, I either seal the opening with cling film in the case of a room box or 1:48 house, or in the case of a bigger house, wrap it in bubble wrap then lightly hold that on by wrapping parcel tape around the bubble wrap.  So that nothing can shift or fall out as it is a sealed environment.  Eventually, when I unpack, I will unpack on a low table placed in the centre of a bedsheet on the carpet, and I will carefully open out each piece of packing material to check that nothing small is embedded in it.  Last time very few things came loose, and I was able to spot them in the packing material.  Worst case scenario, they fall onto the bedsheet where they can easily be spotted."

The Willowcrest is too big to go into a box, so I've just bubblewrapped the heck out of it and we will carry it carefully.  It will probably have to lie on its back in the car, which is going to test the packing arrangements, but I know it's all safely sealed up so even if something does come loose, it shouldn't fall out or get lost.

This blog was already in hibernation, but it will stay that way now for a year or so until we are in our new home.  Hopefully I will have a dollshouse display area and a place to work on my minis.

Wednesday, 21 November 2012

Purchases at the Tom Bishop Madrid show

I went to the Tom Bishop miniatures show in Madrid last weekend for the first time, as part of a fast but fun city break for the weekend.  I enjoyed the show and picked up a few things for the Willowcrest.

The two waste bins and the basket are for the Willowcrest.  They're made of card, decorated with decals, paint and gloss varnish.










This log cabin stitched pillow will go on the sofa in the top floor workshop room.












These sewing supplies will either go onto one of the workshop tables or into the window display.











Otherwise, I'm afraid this house has been hibernating for a while, I haven't been doing much dollshousing for several months now.

Tuesday, 17 April 2012

1950s sewing machine

I've put together the sewing machine kit that I bought at the Arnhem dollshouse show from Sylvia's Lutjebeudel.  I'm quite pleased with how it turned out.

They provided me with a sheet of English instructions when I bought the kit.  The kit has everything you need except tools and glue.  There is a plastic sewing machine body and base, two pieces of wood for the double sub-base, metallic decals, and a photocopied sheet of floral graphics. The instructions were straightforward and there was an accompanying sheet of diagrams which clarified measurements and assembly details.





After shaping and assembling the sub-base with tacky glue, and assembling the sewing machine with Zap-a-Gap, it was time to start painting. The instructions sensibly recommend that you paint different-coloured components separately and assemble them at the end. The blue paint is a stamping paint that I bought from the bargain bin at Hobbycraft a few years ago, the white acrylic is Americana 'White wash' and the silver paint is Games Workshop 'Chain Mail'.









After final assembly, the metallic decals and floral graphic are added, and then I gave it a couple of coats of gloss varnish and added some fine thread to give the illusion of a spool of thread on top.











For the moment, I've positioned it on the bottom shelf of a display unit that still needs filling up, in the quilt shop.






Sunday, 25 March 2012

Catching up

I've been doing a fair bit of dollshouse related activity, just not specifically on the Willowcrest. I went to the Kempton Park dollshouse fair and then I went on a Mulvany and Rogers Masterclass.  This weekend I went to the Arnhem dollhouse fair where I did get some knitting items, knitted sweaters (bargain!!), some spools of thread, and a kit to make a sewing machine - all for theWillowcrest. You can read about the visit on my main blog here and if you scroll down the posts a bit then you will see the Georgian room box I built on my masterclass.

Sunday, 4 March 2012

'Quilted' jacket

Today I made a 'quilted' jacket to hang on a wire mannequin form that I bought some years ago for this purpose. Quilting shops usually have quilted garments on display so I knew that I wanted one for my shop.

This is one of those cheap white-painted-wire constructions, but I like the base and the mannequin pivots on the central stem.










I spray painted it silver by wedging a pen into the neck as a temporary holder.















I have a collection of fabrics that look like miniature quilts, which I put together a few years ago knowing I would need lots of 'quilts' for this shop.  I chose one with miniature Lone Stars to use a feature on the back panel of the jacket, and one that looks like small piecing.  The pattern is from 'Making and Dressing Dollshouse dolls' by Sue Atkinson, and is a boxier version of the Ladies' basic bodice pattern plus I reduced the fullness on the sleeves.  I assembled the back panel by gluing the small pieced fabric around the Lone Star.



I added some patch pockets cut from a third 'quilty' fabric. The hems are glued, but the shoulder and side seams are stitched on the machine using a short stitch length.


Of course, now that I've loaded the pictures onto the computer, now I see that the jacket had slipped to one side on the mannequin before I took the photo.  Grrrr.


And here's a picture looking in the front door of the shop - excuse the flash, I took this in the evening and there wasn't sufficient natural light.

Saturday, 25 February 2012

More clientele

The Lego cash register has been very popular, thanks for your comments.  I bet there are lots of things that could be made out of Lego and then disguised to look appropriate for the dollshouse.

I've now finished the final three dolls that I am upcycling.  The shops now look fairly well populated although there should perhaps be another staff person.  I will keep my eyes open for a decent doll to be a shop assistant.  I do have some other dolls in my stash but unlike these dolls it is their heads and limbs that look mutated, not just their hideous clothes, so no good for this project.

Here is the 'before' picture.













The doll at the left wasn't that bad apart from fur-like hair and a gravity-defying cardigan.  I tamed the cardigan with some hidden stitching, and glued some additional hair onto her head right over the old hair.  There wasn't much I could do about her silhouette which suggests she is wearing the mother of all push-up bras - it's because of the edge of the china head plate across her chest.






The other two dolls are ultra-cheap dolls dressed in hot-glued travesties which I immediately removed.  Amusingly they had glued on lace underwear, which seems a surprising amount of detail considering how hideous their dresses were.  And their bodies are actually quite nice, full china bodies with moving arms and legs. I tried doing something with their nylon hair, but it was too springy so I had to scrape it off.  Their heads have a hollow in them.  I decided that they deserved to be in skirts and dresses to show off their well formed legs.





I've discovered that despite my large stash of ripped-out magazine articles on dressing dolls, and my library of dollshouse books, I don't actually appear to have any modern clothing patterns.  So I had to wing it.  For the first doll, I made a sort of shift dress cut on the bias from very thin cotton denim, and used some of the rick-rack trim from the travesty dress for a belt.  I added a leather handbag I had in my stash, and some blond hair.





For the second doll, I made a blue velvet mini skirt, and then stretched my doll-dressing skills to the limit by constructing a Liberty-style blouse with collar.  For the hair, I tied the centre of a hank of hair tightly with thread, and glued the resulting lump into the hole in the head.  Once that dried, I arranged the hair with a bit more glue around the hairline, then gave her a modern hair cut.




Saturday, 18 February 2012

1:12 scale Cash Register / Till from Lego

I've been looking for a modern cash register for my quilt shop for a long time.  I could only find two for sale online, a British one which wasn't very detailed and an American one which seemed rather expensive.  There is a card printable cash register on Jim's Printables, but I didn't think I could get it to look very realistic.  So I decided I would have to make my own.

Step one was to have a protracted dig in my son's large box of discarded Lego (he has now grown out of it).  After a long search, I came up with the following components.


The two bases are quite thin, only one 'bump' high.  I put one on top of the other to simulate a cash drawer, added the slanted bits to be the keyboard, and topped it with the four-bump bar, and capped off the bumps with the two smooth caps. 


Meanwhile, I was also looking for a bit of Lego to use for a credit card machine.  I didn't find anything, so I had a dig through various other junk boxes and came up with a discarded dollshouse electric plug.

I pulled out the wire and the pins, and cut the plug in half using a razor saw.



To make the sides of the credit card machine, I used one small punched card circle (the size of a hole punch for a ring binder) for the end, and cut two side pieces from a larger punched card circle.




Then I sprayed both assemblies with grey car primer.

To add the detail, I searched on Google Images under 'cash register screen' for the keyboard, 'cash register customer pole display' for the readout, and 'credit card machine' for the credit card machine keyboard.  I shrank the images I found down to the appropriate size, and printed them out on an inkjet printer.  Then I sealed them with DecoArt Multi Sealer, and glued them on using PVA glue.  I also added a poster for quilt classes to the customer side of the register, and a tiny 'crystal' to be the keyhole of the cash drawer.