Still winding fabric bolts

Anyone still reading this blog is likely wondering if I have died. I am still slowly winding fabric bolts for the quilt shop, and probably have the shelves about 75% full now. I've also bought a few more things for the house at the big Miniatura show in Birmingham. And I made this cute Indian elbow basket from a kit.

Earthquake strikes house

Not my house, just the Willowcrest. I decided it was time to move it out of the kitchen, where it has been since I started constructon in October. The main construction was completed a few months ago and since then I am really only working on furnishing the inside. For quite a while the house was on the dining table and we were eating on the picnic table. Then the mostly completed house got moved to the picnic table and we got the big table back. And to be honest I haven't been working on it much, not least because I didn't have enough working room on the little picnic table (I am one of those people that can fill up any given worksurface with cr*p and end up actually working in a clear area about six square inches right on the edge.) So today I took the big decision and moved the house up to my bedroom, and all the tools and bits and pieces and RECLAIMED THE KITCHEN! Hilariously, neither Ds nor Dh have noticed yet, even though they came back to the house while I was in the middle of doing it. I think the mess has been there so long that we have all developed a blind spot for that corner. Needless to say, the kitchen seems enormous now that the massive blot has been cleared away. My plan is to continue to work on furnishing the house in my bedroom (which is also my sewing room). Here is a before and after pic of the kitchen.

The yarn shop is pretty much finished now, although I can always add more accessories. So now I have started winding fabric bolts for the quilt shop. I have cut white mount card into pieces 5/8" x 2 inches. If I cut fabric pieces a little under four inches wide, then fold them in half and iron the fold, I can wind that around the card a few times then glue down the loose end. It makes a fairly realistic looking fabric bolt. Luckily, as a quilter, I have a wide selection of cotton fabric patterns and colours to choose from. It's going a bit quicker than winding yarn balls, but I still need lots and lots of them.

What's happening?

Sorry about the long silence - my momentum has slowed to a crawl the last few months. I never thought that when I set up in our kitchen back in October, that the house would still be here nine months later. Luckily my family are being very supportive about it - they are so used to it being there now that I think it just blends into the general clutter.

I have been making a few furniture kits up for the shops, which I have blogged at my other blog here. I've also continued to wind dozens of balls of wool and have now filled all the displays in the yarn shop.

So the yarn shop is pretty much finished apart from more signage and accessories, and it is time to start creating fabric bolts for the quilt shop. Again, I want to go for a very well stocked look - I think a lot of dollshouse shops fall down because there isn't enough stock to be realistic - real shops are usually pretty crowded with goods for sale.

Dijon UK are having a 50% off sale this week and I have sent off for a modern sink to go in the office (what is normally the kitchen in the Willowcrest). I already have some cool fridge magnets that look like a photocopier and a filing cabinet.

Still winding balls of yarn

I am (very) slowly filling up the yarn studio with balls and skeins of yarn. I can do about 18 in an hour before I get bored. I want the shop to look very well stocked, so I need loads. Not much else is happening apart from I stained the assortment of whitewood furniture for the quilt shop on the main floor so that it all matches. I have sent off for some sewing accessory kits from Lisa's Little Things in America which will help to stock the counters.

Winding endless balls of yarn

Despite winding what seems like 100s of yarn balls, I am still only about halfway through filling up my yarn store shelves on the middle floor of my Willowcrest. I've also worked out a way of winding skeins of yarns, for some variety on the shelves. I've also had some fun pinning up some knitted garments (bought, won in raffles or gifts to me) on the walls.

It's an inside job

The exterior of my Willowcrest is now pretty much finished - there will just be some signage to add with the names of the shops, at some point. I am now working on filling the inside.

The picket fence came from Joanne's Fabric Store in America, it was in the dried flowers section and is about 3/4 inch high - more of a 'keep off the lawn' fence. You can see that I painted my electrical wire green, to blend it into the lawn, and the bit of fence it goes under can be loosened in case I need to lift the house off of the base.

It feels very strange to finally be positioning items and furniture that I first conceived of more than six months ago. I think for a long time it seemed like this day would never come, when the house was still a bunch of unpainted bits of splintery plywood and endless tasks like the clapboarding still lay ahead of me.

I've started with the knitting shop because I have all the furniture pieces for it - I don't have everything for downstairs yet and have ordered a few more bookcases from Maple Street (a dollshouse website here in the UK). I had several white wood bookcases and yesterday I cut up many tongue depressors to create vertical dividers in the bookcases, to turn them into yarn display cases. Then I sprayed them white with auto primer. I took all the balls of yarn I have wound so far - and found they only filled half of one display case when I have five or six to fill. This is going to be a big job. I was able to buy some pre-wound wool balls at the London Kensington show, but I will have to do most myself. I did fill one cabinet so far and it looks very effective.

Gardening time

I've been working on the landscaping around the house. I don't want to do too much, as American houses typically have a pretty empty 'yard', unlike English gardens. I will be adding a picket fence which is why there are little pegs glued into the base which will be the supports for the fence. After painting the base green, I flocked it with model railway fine flock for 'grass', then I added some 'bushes'.

On the side I wanted to use some rose blooms that I bought at a scrapbooking shop. I made stems from paper covered wire painted brown and green, and glued the roses on, then added some 'leaves' of green lichen. The roses all looked a bit same-y so I touched them up with a bit of paint. It doesn't bear close scrutiny but considering it didn't cost much, it looks ok.